Akai MPC Touch User Manual

254
Use the Song field to select the song you want to show.
Use the BPM field to adjust the tempo of the sequence.
To set whether the sequence follows its own tempo or a master tempo, tap the
Seq/Mst button next to the BPM field. Alternatively, press and hold Shift+Tap Tempo.
The counter indicates the current playhead position.
To adjust the position, tap it, and then use the use the Data Dial or the –/+ buttons.
To switch the time increments, double-tap it. You can view it in Bars, Beats, and
Ticks or in hours (HH), minutes (MM), seconds (SS), and frames (FF).
The sequence playlist on the left lists of the “steps” of a song.
Each step has (in columns, left to right):
• a step number (each song can contain up to 999 steps)
• a sequence number and name
• how many times the sequence plays (each step can play up to
999 times; set it to Hld [the lowest/minimum value] to set the
sequence to repeat indefinitely until you stop playback)
• the tempo of the sequence
• the number of bars the step occupies (based on how many
times it plays)

Akai MPC Touch Specifications

General

Display type	LED
Built-in display	Yes
Product color	Black
USB direct playback	-
Built-in optical drive	No
Audio (L/R) in	2
Minimum RAM	4 GB
Minimum processor	Dual Core
Minimum processor speed	2.5 GHz
Minimum storage drive space	2048 MB
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 8