263
Use the Chord fields to determine what chord type will play when pressing a pad. The resulting chord
will use those scale degrees based off of the pad’s root note. You can use this only when the Type is set
to Chords or Chromatic Chords.
When set to Chords, the available chords are:
1-3-5 (major/minor) 1-3-5-7 (major7/minor7)
1-4-5 (sus4) 1-3-5-7b (dominant)
1-2-5 (sus2)
When set to Chromatic Chords, the available chords are:
Major Major7 Augmented
Minor Minor7 Diminished
Sus2 Major9
Sus4 Minor9
Use the Banks selector to determine how the notes are mapped across the pad banks.
• Start on Root: Pad 01 will always be the root note of the scale in every pad bank.
• Continuous: Pad 01 of one bank is always one scale degree higher than Pad 16 of the previous bank.
You can use the buttons at the bottom edge of the touchscreen to quickly select different Types and Chords:
• Tap Notes to automatically set the Type to Notes.
• Tap 1-3-5 to automatically set the Type to Chords and set the Chord to 1-3-5 (major/minor).
• Tap 1-3-5-7 to automatically set the Type to Chords and set the Chord to 1-3-5-7 (major7/minor7).
• Tap Progressions to automatically set the Type to Progressions.
• Tap Octave –/+ to shift the pad assignments down or up by an octave.
•
Press Sh
ift+1-4-5 to automatically set the Type to Chords and set the Chord to 1-4-5 (sus4).
• Press Shift+1-3-5-7b to automatically set the Type to Chords and set the Chord to 1-3-5-7b
(dominant).
• Press Shift+Note –/+ to shift the pad assignments down or up by a scale degree.
To Next Page
Loading...
Need help?
General
