269
Reverb Out Gate
This is a hall reverb that has an
additional control. The reverb effect is
cut off when the output drops below the
level set in the Gate Out parameter.
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 50
Pre-Delay 1–100 50
Early Reflection 0–100 50
Density 0–100 50
Diffuse 0–100 50
Decay 0–100 75
Lo-Cut 0–100 10
Hi-Cut 0–100 10
Gate Out 0–100 0
To Next Page
Loading...
