The routing of the SHDSL cables should be in accordance with the recommended
practices of the cables selected. The cables should be strain relieved to prevent any
force from being exerted on the connectors.
NOTE: The NTU ports can be connected to the LTU ports in any order, as long as
newly connected ports are adjacent to the already used port (or group of ports) on the
LTU, and numerically incrementing port numbers on the NTU are connected to
numerically incrementing port numbers on the LTU. Typical wiring errors are shown in
the “1643 AM/AMS Alarm Messages and Trouble Clearing Guide”.
Figure 4-39 SHDSL cables
TP2
SHDSL
(x-marked sockets are not in use)
to DDF
System cabling
SHDSL interfaces (X12SHDSL-V2 card)
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
4-39
To Next Page
Loading...
