4 4System cabling
Overview
...................................................................................................................................................................................................................................
Purpose
The purpose of this chapter is to provide the pin assignments of the unit interfaces and
the cabling instructions for a proper system cabling. For cable assembly instructions,
please refer to Appendix B.
Contents
Power and ground cable installation 4-3
Power interfaces (AM unit) 4-4
Power interfaces (AMS unit) 4-6
Cabling with AC/DC converter 4-8
Ground wiring 4-11
External cable installation 4-12
Fan power interface 4-13
Fan alarm and LED interface 4-15
MDI/MDO interface 4-17
Timing interface 4-23
Q-LAN interface (OMS) 4-25
ITM-CIT interface 4-27
EOW interfaces 4-30
Option card cable installation 4-32
E1 interfaces (Main board/X16E1-V3 card) 4-33
DS1 interfaces (Main board/X16DS1 card) 4-35
SHDSL interfaces (X12SHDSL-V2 card) 4-37
E3 interfaces (X2E3 card) 4-40
DS3 interfaces (X2DS3 card) 4-41
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
4-1
To Next Page
Loading...
