Alcatel-Lucent 1643 AMS - Cable Design (LAN Cable - GE)

Table 4-15 Pin assignment (LAN cable - GE)
Point on Connector Signal Name MDI Connector
Signal Name
Description
1 BI_DA + BI_DB + Bidirectional data,
poistive
2 BI_DA - BI_DB - Bidirectional data,
negative
3 BI_DB + BI_DA + Bidirectional data,
positive
4 BI_DC + BI_DD + Bidirectional data,
positive
5 BI_DC - BI_DD - Bidirectional data,
negative
6 BI_DB - BI_DA - Bidirectional data,
negative
7 BI_DD + BI_DC + Bidirectional data,
positive
8 BI_DD - BI_DC - Bidirectional data,
negative
Cable data
A standard LAN cable (CAT5) can be used (100 Ω symmetrical).
Cable connection
Please connect the LAN cables as shown in the figure below.
Figure 4-43 Cable design (LAN cable - GE)
System cabling LAN interfaces (X4IP, X8PL and X5IP card)
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
4-43