Mounting the EMC bracket
...................................................................................................................................................................................................................................
When to use
Mount this EMC bracket after you have installed one of the following option cards:
• X16E1-V3
• X16DS1
• X12SHDSL-V2.
This bracket must be mounted to comply with the EMC-requirements.
Procedure
Proceed as follows to mount the EMC bracket:
...................................................................................................................................................................................................
1
Insert the EMC bracket in the right position as shown in the figure below.
...................................................................................................................................................................................................
2
Fix the bracket to the option card with screws on both ends.
...................................................................................................................................................................................................
3
Reinstall the top cover.
Result
Figure 3-16 Mounting the EMC bracket (AMS unit)
Mechanical installation
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
3-23
E ND OF STEPS
...................................................................................................................................................................................................