EasyManua.ls Logo

Alcatel-Lucent 1643 AMS - Technical Specifications (FSP12 AMS)

Alcatel-Lucent 1643 AMS
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 2-2 Technical specifications (FSP12AMS) (continued)
Item FSP12AMS
Power consumption < 125 W
Weight 3.4 kg
Dimensions (HxWxD) 45 mm x 445 mm x 235 mm
1643 AM main board assembly
The 1643 AM AM main board assembly contains the following:
One or two STM-1 or two STM-4 optical line interface pairs (transmit/receive).
The optical interfaces are of type SC connectors. The optical adaptors, FC and ST,
are also supplied with the equipment.
The optical interfaces with a choice between STM-1 short haul (two variants
available) or long haul or STM-4 short haul or long haul.
Sixteen 2048 kbit/s electrical tributary interfaces (E1) with RJ45 connectors,
suitable for symmetrical twisted pair cables with an impedance of 120 or for
coaxial cables with an impedance of 75 .
An F-interface for the ITM-CIT with an RJ45 connector.
A Q-LAN interface for the OMS with an RJ45 connector.
A timing output for 2 MHz synchronization with an RJ45 connector, suitable for
symmetrical twisted pair cables with an impedance of 120 or for coaxial cables
with an impedance of 75 .
DC dual power or AC single power connector
Four Miscellaneous Discrete Input (MDI) ports
Four Miscellaneous Discrete Output (MDO) ports
Two LEDs (red and green) to indicate the status of the unit.
1643 AMS main board assembly
The 1643 AMS AMS main board assembly contains the following:
None, one or two STM-1 optical/electrical line interface pairs (transmit/receive).
More information is given in section “Pluggable SFPs” (p. 2-5).
1643 AMS E1 version (CC109445643):
Sixteen 2048 kbit/s electrical tributary interfaces (E1) with RJ45 connectors,
suitable for symmetrical twisted pair cables with an impedance of 120 or for
coaxial cables with an impedance of 75 .
1643 AMS DS1 version (CC109445650):
Sixteen 1544 kbit/s electrical tributary interfaces (DS1) with RJ45 connectors,
suitable for symmetrical twisted pair cables with an impedance of 100 .
An F-interface for the ITM-CIT with an RJ45 connector.
A Q-LAN interface for the OMS with an RJ45 connector.
General information
Hardware description
...................................................................................................................................................................................................................................
2-4
Alcatel-Lucent - Proprietary
See notice on first page
365-312-802R7.2
Issue 4, June 2007

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS