Street cabinet mounting (with fan unit)
The 1643 AM unit can be mounted in an outdoor street cabinet in conjunction with an
AnyMedia Access System. In that case, a fan unit containing two fans must be
mounted to the side of the 1643 AM unit. Proceed as follows to mount the 1643 AM
unit into a street cabinet:
...................................................................................................................................................................................................
1
Unscrew the six M3x3 screws which are pre-screwed on the right side of the 1643 AM
unit.
...................................................................................................................................................................................................
2
Place the fan unit with its slotted holes over the screw heads.
Important! Pay attention to the correct orientation (see Figure 3-13, “Mounted fan
unit” (p. 3-18)). The alarm and LED interface must be located closer to the 1643
AM unit than the power interface.
...................................................................................................................................................................................................
3
Shift the fan unit until it cannot be moved any longer.
...................................................................................................................................................................................................
4
Fix the screws through the fan unit holes.
...................................................................................................................................................................................................
5
Fix the brackets to the fan unit with four M3x8 screws.
...................................................................................................................................................................................................
6
Mount the 1643 AM unit to the rack with four hexagon bolts M6x16.
NOTE: The connectors of both units (fan and unit) must show to the front.
Mechanical installation
AM unit installation
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
3-17
E ND OF STEPS
...................................................................................................................................................................................................