Alcatel-Lucent 5620 - 9500 MPR Services Support

9 — 9500 MPR service management and service tunnels
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 9-3
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Service-in-service automatic discovery
The 5620 SAM supports automatic discovery for service-in-service associations
created with the 9500 MPR. Service-in-service refers to a transport service that
carries services for network routers. Automatic discovery allows the 5620 SAM to
automatically associate a transport service with a service tunnel when a physical link
is created between the 9500 MPR and a non-MPR NE. Service faults generated on
either of the associated services become cross-correlated in the 5620 SAM.
Switching between in-service radio links and standby radio links
You can switch between an in-service protected radio link and a standby protected
radio link during a maintenance window, if required. See Procedure 6-6 for more
information. In-service protected radio links are represented as green links on the
Physical topology map; standby radio links are shown as blue links.
9500 MPR services support
Table 9-1 provides a summary of hop-based services that are supported on the
9500 MPR.
Table 9-1 Summary of 9500 MPR hop-based services support
Note 1 — Service-in-service automatic discovery will not overwrite a
service that is already associated with a service tunnel. Users can,
however, manually overwrite an automatic association with another
service. Only one service can be associated with a service tunnel. See
the “Service tunnels” chapter in the 5620 SAM User Guide for more
information about associating a service to a service tunnel.
Note 2 — If the physical link between the 9500 MPR and the network
router is removed, the 5620 SAM automatically disassociates the
service from the service tunnel.
Profile
type
Node profile
type
VLAN path
type
VLAN path
creation type
Extension of
VLAN path
Terminates
on radio
NEtO service
interworking
Service
Discovery
Initial
5620 SAM
release
Hop-based services related to radio ports
Cpipe TDM2TDM
TDM2ETH
TDM2TDMoETH
SDH2SDH
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
8.0 R5
Apipe ATM2ATM
ATM2ETH
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
8.0 R5
VLAN Dot1Q
Dot1AD
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
8.0 R5
(1 of 3)