7 — 9500 MPR/9500 MPRe port object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-7
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
7 In the Port Usage panel, configure the ports by choosing one of the following:
• EMPTY
• SFP-O
• SFP-E
a When you set the port to SFP-O, the 2 × STM port is configured and the
Protection tab is enabled. See Procedure 6-4 for more information about card
protection.
b When you set the port to SFP-E, the 2 × STM port is configured but the
Protection tab is disabled.
c When you set the port to EMPTY, all the configured ports revert to an empty
slot after the port is shut down.
8 After the SFP-O ports are configured, choose Card→Properties. The Card [Edit]
form opens with the Protection tab enabled.
9 Set the Protection Type parameter to 1+1 EPS protection. All of the SFP-O ports
are protected.
10 Click on the OK button to save the change. A dialog box appears.
11 Click on the Yes button. The Card [Edit] form closes.
Procedure 7-3 To configure 9500 MPR 1 × STM (Channelized) ports
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NEs icon.
3 Right-click on the card where you need to configure the 1 × STM (Channelized)
card type and choose Configure card from the contextual menu. The Card Slot
[Create] form opens with the General tab displayed.
4 Set the Assigned Card Type parameter to 1 × STM (Channelized).
5 Expand to the port level and right-click on Properties. The Physical Port [Edit]
form opens with the General tab displayed.
Note 1 — You need to shut down the configured port to remove the
port. Select the port and choose Port→Shut Down. Choose
Port→Properties. Configure the Port Usage parameter to EMPTY. The
SFP-O ports are removed. You can now configure other ports.
Note 2 — Protection for cards is at the card level, and cannot be
configured at the port level. Configure protection for the main cards
and the spare cards.
Note 3 — 1+1 Protection can be set at different card levels. This
provides redundancy.
To Next Page
Loading...
