4 — 9500 MPR/9500 MPRe object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 4-3
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
3 Configure the parameters as required:
4 Click on the OK button. A dialog box appears.
5 Click on the Yes button. The Network Element (Edit) form closes.
Procedure 4-2 To resolve 9500 MPR MIB inconsistencies
Perform this procedure to resolve inconsistencies created due to MIB population
failures that can occur during service creation on a 9500 MPR NE. Alcatel-Lucent
recommends that inconsistencies be resolved before any service creation. For failures
during 9500 MPR service creation, perform a resynchronization of the NE in order to
restore existing NE entries. Inconsistencies are detected during NE synchronization or
when opening the NE properties form. If there are inconsistencies, an alarm with a
Warning severity level on the NE appears.
1 Right-click on a 9500 MPR NE device in the navigation tree, and choose Properties
from the contextual menu. The Network Element (Edit) form opens with the
General tab displayed.
2 If there are NE inconsistencies, a Cleanup Inconsistencies button appears on the
form, or the Cleanup Inconsistencies option appears under the More Actions
button.
3 Click on the Cleanup Inconsistencies button. If the Cleanup Inconsistencies button
is not visible, click on the More Actions button and choose Cleanup
Inconsistencies.
4 Click on the Faults tab of the Network Element (Edit) form to check for any
remaining NE inconsistency alarms.
• DHCP Server
• Admission Control
• Bridge Type
• Event and Alarm Log
• Ethernet LOS Criteria
• Static Lag Criteria
• Physical Impedance
• System Priority
• Ais Insertion LOF Detection
To Next Page
Loading...
