Alcatel-Lucent 5620 - 9500 MPR Service Tunnel (ERPS) Support

9 — 9500 MPR service management and service tunnels
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 9-7
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
• Mobile backhaul (applicable to 9500 MPR and 7705 SAR on MPLS-based
services running over a VLAN):
Discovery adds MPR VLL services that are associated with an SDP tunnel or are
traversing through network interfaces that are being used by an L2/L3 VPN
through any static or dynamic LSPs that are bound to SDPs on the service.
See the “Service tunnels” chapter in the 5620 SAM User Guide for the complete list
of supported objects that service tunnels can be configured for, and for more service
tunnel information.
9500 MPR service tunnel (ERPS) support
You can configure the 9500 MPR using an ERPS topology to create a collection of
Ethernet ring nodes to form a closed physical loop. Between two and sixteen
Ethernet ring nodes are supported per ERPS topology. The 9500 MPR ERPS support
includes tail nodes that connect to ERPS ring nodes. Multiple tail node
configurations are supported by the 5620 SAM.
Table 9-2 provides a summary of the ERPS service types that are supported on the
9500 MPR. See the 9500 MPR/9500 MPRe service provisioning considerations and
constraints subsection in this chapter.
See the “Service tunnels” chapter in the 5620 SAM User Guide for information about
Ethernet (G.8032) rings and the 9500 MPR ERPS tail node support, and the service
types supported. See Procedure 9-1 for information about how to create an Ethernet
radio ring element on a 9500 MPR.
Table 9-2 Summary of 9500 MPR ERPS services support
Profile
type
Node profile
type
VLAN path
type
VLAN path
creation type
Extension of
VLAN path
Terminates
on radio
NEtO service
interworking
Service
Discovery
Initial
5620 SAM
release
ERPS services - without tail (Radio Ring type)
Cpipe TDM2TDM
TDM2ETH
Ring based
with tail
Manual No No None On adding
ring elements
to ring
9.0 R7
VLAN Dot1Q Ring based Manual Yes Yes None On adding
ring elements
to ring
9.0 R7
ERPS services - without tail (Fiber Microwave type)
Cpipe TDM2TDM
TDM2ETH
TDM2TDMoETH
Ring based Manual No No None On adding
ring elements
to ring
10.0 R7
VLAN Dot1Q Ring based Manual No No None On adding
ring elements
to ring
10.0 R7
ERPS services - Ring tail based (Radio Ring type)
Cpipe TDM2TDM
TDM2ETH
TDM2TDMoETH
Ring based
with tail
Manual No Yes None On adding
ring elements
to ring
10.0 R3
(1 of 2)