7 — 9500 MPR/9500 MPRe port object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-9
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Procedure 7-4 To configure 9500 MPR E1 and DS1 ports
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NEs icon.
3 Right-click on the device where you need to configure a 9500 MPR E1 or DS1 port
and choose Properties from the contextual menu. The Network Element (Edit)
form opens with the General tab displayed.
4 On the Network Element (Edit) form navigation tree, expand the Shelf icon.
5 Expand to the port level and click on a port object. The Physical Port (Edit) form
opens with the General tab displayed.
6 Configure the parameters:
• Current OLC State
• User Label
7 Click on the States tab.
8 Configure the Administrative State parameter.
9 Click on the DS1/E1 tab.
10 Configure the parameters:
• Signal Mode
• Line Code
If you are configuring an E1 port, you can only configure the Signal Mode
parameter.
11 Click on the other tabs in the properties form to view more port information.
12 Click on the OK button. A dialog box appears.
13 Click on the Yes button. The Physical Port (Edit) form closes.
Procedure 7-5 To configure 9500 MPR DS3 ports
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NEs icon.
3 Right-click on the device where you need to configure a 9500 MPR DS3 port and
choose Properties from the contextual menu. The Network Element (Edit) form
opens with the General tab displayed.
4 On the Network Element (Edit) form navigation tree, expand the Shelf icon.
To Next Page
Loading...
