6 — 9500 MPR/9500 MPRe shelf object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 6-7
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
1 × STM (Channelized) card
The 1 × STM (Channelized) card can be configured in all card slots on the
9500 MPR. Up to one port can be configured. This ETSI card supports SFP-O and
SFP-E port usage type. Up to 63 E1 channels are supported. Services are deployed
at the E1 channel level as TDM.
See Procedure 7-3 for information about configuring ports on the 1 × STM
(Channelized) card.
AUX alarm card
The AUX alarm card provides support to monitor a number of housekeeping, station
input, and station output alarms. The 5620 SAM support for the AUX alarm card
only applies to following alarm types:
• card fail
• card missing
• equipment mismatch
• unconfigured equipment
• firmware download in progress
• housekeeping
See the 5620 SAM Alarm Reference for the alarm descriptions, the generating and
clearing conditions of alarms, and the remedial actions to fix the problems.
Only one AUX alarm card is supported per 9500 MPR MSS shelf (ETSI 3.1 or later).
On the MSS-4 shelf, the AUX alarm card is supported in slot 4. On the MSS-8 shelf,
the AUX alarm card is supported in slot 8. See Procedure 7-6 for information about
configuring ports on the AUX alarm card.
6.4 Workflow to manage shelf objects on 9500 MPR/9500 MPRe
devices
The following workflow describes the sequence of high-level tasks required to configure
and manage 9500 MPR/9500 MPRe device shelf objects; see the “Shelf object
configuration” chapter in the 5620 SAM User Guide for the generic procedures that
apply to this device type. Also, configure the following device-specific tasks or
functions:
1 As required, perform the following procedures to configure 9500 MPR/9500 MPRe
device shelf objects.
a Configure NTP on 9500 MPR devices; see the “Shelf object configuration”
chapter in the 5620 SAM User Guide.
b Migrate a 9500 MPRe connected to a 7705 SAR from standalone mode to
single NE mode; see Procedure 6-1.
c Manage 9500 MPR running software; see Procedure 6-2.
d Configure a basic or advanced fan tray on the 9500 MPR; see Procedure 6-3.
To Next Page
Loading...
