Alcatel-Lucent 5620 - Procedure 8-1 to Configure and Distribute a 9500 MPR ATM Qos; Policy

8 — 9500 MPR/9500 MPRe QoS policies
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 8-3
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Procedure 8-1 To configure and distribute a 9500 MPR ATM QoS
policy
1 Choose Policies→QoS→9500 MPR QoS→ 9500 ATM QoS from the 5620 SAM main
menu. The 9500 ATM QoS Policies form opens.
2 Perform one of the following:
a Configure the Policy scope parameter to Global.
b Configure the Policy scope parameter to Local.
i Configure the Local Node IP Address parameter, if required.
ii Click on the Select button and choose a device.
iii Click on the OK button.
3 Click on the Create button. The 9500 ATM QoS Policy, Global Policy (Create) form
opens with the General tab displayed.
4 Configure the parameters:
• Auto-Assign ID
• Displayed Name
5 Click on the QoS tab.
6 Configure the parameters:
7 Click on the OK button to save the policy. The ATM QoS Policy (Create) form closes
and the 9500 ATM QoS Policies form reappears.
8 Click on the Search button to display the created policy or policies.
9 To distribute the 9500 ATM QoS policy, see the “Policies overview” chapter in the
5620 SAM User Guide.
• Service Category
• Policing
• PCR (cells/second)
• CDVT (microseconds)
• MDCR (cells/second)