11 — 9500 MPR VLL service management
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 11-11
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
10 Click on the OK button. The VLL_type Service (Edit) form reappears with the new
information displayed in the service component tree.
11 Click on the OK button. The VLL_type Service (Edit) form closes.
You can use the topology maps to view the service. See the topology map
management chapter in the 5620 SAM User Guide for more information.
Procedure 11-5 To discover 9500 MPR VLL services
The 9500 MPR VLL services are not discovered automatically during NE discovery.
Perform this procedure after all 9500 MPR NEs are synchronized in the 5620 SAM.
1 Choose Manage→Service→Services from the 5620 SAM main menu. The Manage
Services form opens.
2 Click on the Discover 9500 MPR Services button and choose one of the following
options:
• Hop Based
• Ring Based
The Ring Based option discovers both VLL and VLAN services associated with
the ring and tail.
3 The Discover 9500 MPR Services form opens with the network group in the list.
4 Choose t the network group and click on the OK button. The Manage Services form
opens with the services displayed.
If you created network subgroups and the nodes are split over different subgroups,
you must select all of the subgroups and click on the OK button to discover all of
the services.
5 Click on the Search button. The discovered service appears in the Manage Services
form.
6 Close the Manage Services form.
Note — If any of the discovered nodes contain ring instances, they
should be added to ring elements before using the hop or ring-based
discovery button. For a ring-based service, the ring element must be
added to the ring. See Procedure 9-1 for information about creating an
Ethernet radio ring element.
To Next Page
Loading...
