Alcatel-Lucent 5620 - Procedure 3-1 to Commission a 9500 MPR;9500 Mpre for 5620 SAM; Management

3 — 9500 MPR/9500 MPRe device commissioning and management
3-6 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Procedure 3-1 To commission a 9500 MPR/9500 MPRe for 5620 SAM
management
Perform this procedure to configure a 5620 SAM mediation policy and discovery rule for
a 9500 MPR.
1 To configure SNMPv2 management of the device, perform the following steps.
i Choose Administration→Discovery Manager from the 5620 SAM main menu.
The Discovery Manager (Edit) form opens with the Discovery Rules tab
displayed.
ii Click on the Create button. The Create Discovery Rule step form opens.
iii Enter a description in the Description field for the discovery rule. Click on
the Next button.
iv In step 2 of the step form (Add Rule Elements), click on the Create button.
The Topology Discovery Rule Element (Create) form opens.
v Enter the 9500 MPR management IP address as the rule element for the
discovery rule and click on the OK button. A warning message appears.
vi Click on the OK button to acknowledge and dismiss the warning message.
vii Go to step 4 in the step form by clicking on the Next button.
viii Click on the Select button in the Read Access Mediation Policy panel. The
Configure Mediation Security – Topology Discovery Rule form appears.
ix Select a mediation security policy and click on the OK button. The form
closes and the selected policy displays in the Read Policy Name parameter
field.
x Repeat steps 1 viii and 1 ix to select a Write Access Mediation Policy and Trap
Access Mediation Policy.
xi Click on the Finish button to save and close the Create Discovery Rule step
form. A warning message appears.
xii Click on the OK button to acknowledge and dismiss the warning message.
xiii Click on the OK button. The Discovery Manager (Edit) form opens with the
new discovery rule displayed.
Note — Ensure that you create the mediation policy based on whether
the 9500 MPR device supports SNMPv2 or SNMPv3, along with the
appropriate Trap mediation policy with community string.
Note — The 5620 SAM uses the default SNMPv2 mediation security
policy to discover the 9500 MPR.