7 — 9500 MPR/9500 MPRe port object configuration
7-4 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
c 1 × STM (Channelized) card port; see Procedure 7-3
d E1 and DS1 ports; see Procedure 7-4
e DS3 ports; see Procedure 7-5
f AUX alarm ports; see Procedure 7-6
g 9500 MPRe ports; see Procedure 7-7
3 As required, configure or perform the following on 9500 MPR or 9500 MPRe device
ports:
a analog performance management on 9500 MPR 1x radio modem ports; see
Procedure 7-8
b power level performance management on 9500 MPR 1x radio modem ports;
see Procedure 7-9
c 9500 MPR port segregation; see Procedure 7-10
d power source type on 2+2 × Ethernet (EAS) card slots for 9500 MPR; see
Procedure 7-11
e add or delete 9500 MPR port protection; see Procedures 7-12 or
Procedure 7-13
f loopback test on a 9500 MPR DS1, ES1, or 1x radio modem port; see
Procedure 7-14
7.3 Port configuration procedures
Use the following procedures to manage 9500 MPR or 9500 MPRe device ports
using the navigation tree.
Procedure 7-1 To configure 9500 MPR/9500 MPRe Ethernet ports
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NEs icon.
3 Right-click on the device where you need to configure an 9500 MPR Ethernet port
and choose Properties from the contextual menu. The Network Element (Edit)
form opens with the General tab displayed.
4 On the Network Element (Edit) form navigation tree, expand the Shelf icon.
5 Expand to the port level and click on a port object. The Physical Port (Edit) form
opens with the General tab displayed.
6 Configure the Port Usage parameter if you are provisioning the following ports:
• ports 1 to 4 on the 2+2 × Ethernet (EAS) card
• ports 5 to 8 on the 4+4 × Ethernet (EAS) card
• ports 1 to 6 on the core-enhanced card
To Next Page
Loading...
