7 — 9500 MPR/9500 MPRe port object configuration
7-14 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
10 Click on the OK button. The Select From Port - Port Segregation form closes and
the Add Member step-form reappears.
11 For an EAS module, the Select To Type step is displayed. Choose a value for the
To Type parameter from the drop-down menu, and click on the Next button.
12 In the To Port step, choose a port from the list and click on the Finish button. A
dialog box appears.
13 Click on the OK button. The Add Member Wizard form closes.
14 To add more port combinations, repeat steps 6 to 13.
15 Click on the OK button. The Shelf (Edit) form closes.
Procedure 7-11 To configure 9500 MPR 2+2 × Ethernet (EAS) card
slot power source type
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NEs icon.
3 Right-click on the device on which you want to configure a power source type and
choose Properties from the contextual menu. The Network Element (Edit) form
opens with the General tab displayed.
4 On the Network Element (Edit) form navigation tree, expand the Shelf icon.
5 Expand to the card level and click on a 2+2 × Ethernet (EAS) card slot object. The
Card Slot (Edit) form opens with the General tab displayed.
6 Click on the Power Source tab.
7 Select a displayed interface. If no interface is displayed, click on the Search
button and then select a displayed interface. The Power Source (edit) form opens.
8 In the Power Source panel, configure the Type parameter.
9 Click on the OK button. The Power Source (Edit) form closes.
10 The Card Slot (Edit) form reappears. Click on the OK button. A dialog box appears.
11 Click on the Yes button. The Card Slot (Edit) form closes.
To Next Page
Loading...
