11 — 9500 MPR VLL service management
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 11-3
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
8 Turn up the VLL service as required by configuring the Administrative State
parameter in the Create Services form to Up.
9 Perform the following, as required:
a View the VLL service operational status or view the service topology map
associated with a VLL service; see the 5620 SAM User Guide.
b Delete a VLAN group or group member; see Procedure 10-6.
c Delete a 9500 MPR VLAN path; see Procedure 10-7.
d Modify or delete a VLL service; see the 5620 SAM User Guide.
11.3 VLL service management procedures for 9500 MPR devices
Use the following procedures to perform VLL service creation and management
tasks for 9500 MPR devices.
Procedure 11-1 To create a VLL Apipe service on the 9500 MPR (ETSI
only)
1 Choose Create→Service→9500 VLL→Apipe (ATM to ATM/Eth) from the 5620 SAM
main menu. The Apipe Service (Create) form opens with the General tab
displayed.
2 Click on the Select button to choose a customer to associate with the Apipe
service. The Select Customer - Apipe Service form opens.
3 Choose the Default Customer as the customer for the Apipe service and click on
the OK button. The Select Customer - Apipe Service form closes and the Apipe
Service (Create) form reappears with the customer information displayed.
4 Configure the parameters:
The Service ID parameter is configurable when the Auto-Assign ID parameter is
disabled.
The SVC Mgr Service ID parameter is configurable when the Auto-Assign ID
parameter is disabled.
The Current OLC State parameter is configurable when you click on the Apply
button.
5 Click on the Select button to choose a VLAN path to associate with the Apipe
service. The Select VLAN Path - Apipe Service form opens.
• Service ID
• Auto-Assign ID
• SVC Mgr Service ID
• Service Name
• Description
• Service Tier
• Service Priority
• Specify VLAN Path
• Current OLC State
• Revert OLC State
To Next Page
Loading...
