7 — 9500 MPR/9500 MPRe port object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-13
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
5 Expand to the port level and click on a port object. The Physical Port (Edit) form
opens with the General tab displayed.
6 Click on the Statistics tab.
7 In the Select Object Type area, choose one of the following from the contextual
menu:
• Hop Current Data Stats
• Link Current Data Stats
• RSL Hop Current Data Stats
• TSL Hop Current Data Stats
8 Click on the Collect button.
9 A statistics record appears in the Physical Port (Edit) form. Select the record.
10 Click on the Properties button. The Statistics Record - RSL/TSL Hop Current Data
Stats form opens.
11 View the read-only power level performance parameter values for the 1x radio
modem port.
12 Click on the Close button. The Statistics Record - RSL/TSL Hop Current Data Stats
form closes.
13 Close the Physical Port (Edit) form.
Procedure 7-10 To configure 9500 MPR port segregation
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NEs icon.
3 Right-click on the device where you need to configure port segregation and choose
Properties from the contextual menu. The Network Element (Edit) form opens
with the General tab displayed.
4 Click on a shelf object. The Shelf (Edit) form opens with the General tab
displayed.
5 Click on the Port Segregation tab.
6 Click on the Create button. The Add Member step-form opens.
7 For an EAS module, the Select From Type step is displayed. Choose a value for the
From Type parameter from the drop-down menu and click on the Next button.
8 In the From Port step, click on the Select button beside the From Port field. The
Select From Port - Port Segregation form opens.
9 Choose a port from the list.
To Next Page
Loading...
