7 — 9500 MPR/9500 MPRe port object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-11
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
7 Double-click on a port. The Auxiliary Input - auxIn [Edit] form opens.
8 Configure the parameters:
• User Label
• Polarity
9 Click on the OK button to apply the changes.
10 Click on the External Point Outputs tab.
11 Double-click on a port. The Auxiliary Output - auxOut [Edit] form opens.
12 Configure the parameters:
• User Label
• Polarity
• External State
13 Click on the OK button to apply the changes.
14 Optionally, click on the Aux Card Specifics tab or IO Card tab to display more
read-only AUX alarm card properties.
15 Click on the OK button to apply the changes and close the Card Slot [Port Number],
AUX, Shelf (Edit) form.
Procedure 7-7 To configure a 9500 MPRe port
Perform this procedure to configure the OLC parameters and administrative state of a
9500 MPRe port. All other radio port parameters must be configured using the MCT.
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPRe icon to the port level and click on a port object. The
Physical Port (Edit) form opens with the General tab displayed.
3 Right-click on the device where you need to configure a 9500 MPRe port and
choose Properties from the contextual menu. The Network Element (Edit) form
opens with the General tab displayed.
4 Configure the Current OLC State and Revert OLC State parameters.
5 Click on the OK button. A dialog box appears.
6 Click on the OK button. The Physical Port (Edit) form closes.
To Next Page
Loading...
