6 — 9500 MPR/9500 MPRe shelf object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 6-11
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
12 Click on the OK button. A dialog box appears.
13 Click on the Yes button. When the standby and committed software versions are
different or the forced activation option is selected, the 9500 MPR/9500 MPRe
reboots using the standby software. If the standby and committed software
versions are the same and the activation option is chosen, the
9500 MPR/9500 MPRe does not reboot and the Shelf (Edit) form closes.
14 When the 9500 MPR/9500 MPRe reboots, you can confirm that the
9500 MPR/9500 MPRe is running the software stored in the former standby bank.
The former standby software is the committed software and the previous
committed software is the standby software.
Procedure 6-3 To configure a 9500 MPR basic or advanced fan tray
For the advanced fan tray, you can configure four ports for housekeeping alarms. If you
configured a basic fan and you need to change to an advanced fan, you do not need to
decommission the basic fan first.
The advanced fan is only supported on the 9500 MPR Release 4.2 or later.
1 Choose Equipment from the navigation tree view selector. The navigation tree
displays the Equipment view.
2 Expand the 9500 MPR NE object.
3 RIght-click on a shelf object. The Shelf (Edit) form opens with the General tab
displayed.
4 Click on the Fan Trays tab.
5 Click on the Create button. The Fan Tray (Create) form opens.
6 Configure the parameters:
• Tray ID
• Fan Type
7 If you configured the Fan Type parameter as A-Fan, go to step 8. Otherwise, go to
step 13.
8 Click on the External Point Inputs tab.
9 Click on the Properties button. The Auxiliary Inputs (Edit) form opens with the Aux
Input tab displayed.
10 Configure the parameters, as required:
• User Label
• Polarity
11 Click on the OK button. The Auxiliary Inputs (Edit) form closes and the Fan Tray
(Edit) form reappears.
To Next Page
Loading...
