Alcatel-Lucent 5620 - Constraints

9 — 9500 MPR service management and service tunnels
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 9-5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Notes
(1)
Deprecated from the 5620 SAM in Release 11.0R1.
(2)
Only supported on ANSI nodes.
9500 MPR/9500 MPRe service provisioning considerations and
constraints
The following 9500 MPR services considerations and constraints apply to both
Tables 9-1 and 9-2 when provisioning services with the 9500 MPR.
• You cannot convert P2P VLAN paths to P2MP VLAN path and vice versa.
• Services and VLAN paths are only supported on the MSS-x shelf.
• You cannot configure the radio-end of the service using the 5620 SAM.
Cpipe TDM2ETH
TDM2TDMoETH
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
9.0 R5
Apipe ATM2ATM
ATM2ETH
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
9.0 R5
VLAN Dot1Q
Dot1AD
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
9.0 R5
VLAN Dot1Q
Dot1AD
P2MP
(hop-based)
Auto (point to
multipoint)
Yes No Limited Discovery
button from
10.0 R5 or
later
10.0 R3
Hop-based services related to Ethernet links
Cpipe TDM2ETH
TDM2TDMoETH
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
8.0 R5
Apipe ATM2ATM
ATM2ETH
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
8.0 R5
VLAN Dot1Q
Dot1AD
P2P
(hop-based)
Manual
Auto
P2P
No No Limited Discovery
button from
10.0 R5 or
later
8.0 R5
VLAN Dot1Q
Dot1AD
P2MP
(hop-based)
Auto (point to
multipoint)
Yes No Limited Discovery
button from
10.0 R5 or
later
10.0 R3
Profile
type
Node profile
type
VLAN path
type
VLAN path
creation type
Extension of
VLAN path
Terminates
on radio
NEtO service
interworking
Service
Discovery
Initial
5620 SAM
release
(3 of 3)
Note — The base release for these service provisioning
considerations and constraints on the 9500 MPR is 5620 SAM
Release 8.0 R5.