Alcatel-Lucent 5620 - Procedure 10-5 to Discover 9500 MPR VLAN Services; Procedure 10-6 to Delete a VLAN Group or Group Member

10 — 9500 MPR VLAN service management
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 10-13
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
Procedure 10-5 To discover 9500 MPR VLAN services
The 9500 MPR VLAN services are not discovered automatically during NE discovery.
Perform this procedure after all 9500 MPR NEs are synchronized in the 5620 SAM.
1 Choose Manage→Service→Services from the 5620 SAM main menu. The Manage
Services form opens.
2 Click on the Discover 9500 MPR Services button and choose one of the following
options:
• Hop Based
• Ring Based
The Ring Based option discovers both VLL and VLAN services associated with
the ring and tail.
3 The Discover 9500 MPR Services form opens with the network groups in the list.
4 Choose a network group and click on the OK button. The Manage Services form
opens.
If you created network subgroups and the nodes are split over different subgroups,
you must select all of the subgroups and click on the OK button to discover all of
the services.
5 Click on the Search button. The discovered services appear in the Manage Services
form.
6 Close the Manage Services form.
Procedure 10-6 To delete a VLAN group or group member
1 Choose Manage→ VLAN→VLAN Group from the 5620 SAM main menu. The Manage
VLAN Groups form opens.
2 Apply a filter, or create and apply a filter, and click on the Search button. A list
of VLAN groups appears.
Note — A prerequisites for discovering VLAN services on the 9500 MPR
is that the nodes that are part of the VLAN service must be contained in
a VLAN group. If any of the discovered nodes contain ring instances,
they should be added to ring elements before using the hop or
ring-based discovery button. For a ring-based service, the ring element
must be added to the ring. See Procedure 10-1 for information about
creating VLAN groups. See Procedure 9-1 for information about creating
an Ethernet radio ring element.
Note 1 — You must delete all of the members from a group before you
can delete the group.
Note 2 — A 9500 MPR group member cannot be deleted if it is part of a
VLAN path.