10 — 9500 MPR VLAN service management
10-8 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
38 Choose a 9500 MPR from the list and click on the OK button. The New VLAN Path
form closes and the IP address of the NE appears in the Network Element
parameter.
39 If you need to add another hop, click and the Apply button and repeat steps 37
and 38. Click on the OK button after you add all hops.
40 Close the Hop (Create) form. Go to step 51.
41 Click on the Next button. The Define Source Site step appears.
42 Perform one of the following:
a Enter the IP address of the starting VLAN path endpoint in the Starting
Network Element parameter.
b Click on the Select button. The Select a Network Element - Define Source Site
form opens. Choose a 9500 MPR from the list and click on the OK button. The
Select a Network Element - Define Source Site form closes and the IP address
of the selected 9500 MPR appears in the Starting Network Element
parameter.
43 Click on the Next button. The Define Destination Site step appears.
44 Click on the Select button. The Select a Network Element - Define Destination Site
form opens. Choose a 9500 MPR from the list and click on the OK button. The
Select a Network Element - Define Destination Site form closes and the IP address
of the selected 9500 MPR appears in the Destination Network Element parameter.
45 Click on the Next button. The Possible Vlan Paths step appears.
46 Click on the Insert Hop button to insert a VLAN path hop. The Hop for New VLAN
Path (Create) form opens.
47 Click on the Select Network Element button. The Select a Network Element - New
VLAN Path form opens.
48 Choose a 9500 MPR from the list and click on the OK button. The New VLAN Path
form closes and the IP address of the NE appears in the Network Element
parameter.
49 If you need to add another hop, click on the Apply button and repeat steps 47
and 48. Click on the OK button after you add all hops.
50 Close the Hop for New VLAN Path (Create) form.
51 Click on the Finish Button to save the VLAN path configuration.
52 Click on the Close button. The Create VLAN Path form closes.
53 Close the Manage VLAN Paths form.
To Next Page
Loading...
