Alcatel-Lucent 5620 - Page 27

1 — What’s new?
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 1-3
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
SAM-21798 Enhanced fan tray The 5620 SAM supports the configuration of an
enhanced fan tray with relay alarm points on the
9500 MPR, Release 4.2 or later.
Procedure 6-3
SAM-21800 SNMP for G.826 radio
PM
The 5620 SAM supports SNMP for G.826 radio PM
(current and historical data) on the 9500 MPRe.
_
SAM-21861 VLAN topology view
observation with P2MP
extension
During the creation of VLAN services, intermediate
sites are automatically added to the service topology
view.
Procedure 10-3
SAM-21862 VLAN service with radio
port as endpoint
The 5620 SAM supports a radio port as an access
interface on a hop-based VLAN service on the
9500 MPR.
Procedure 10-3
SAM-21903 ERPS ring services
discovery button
The 5620 SAM supports a button for discovery of ERPS
ring services on the 9500 MPR.
Procedures 10-5 and
11-5
11.0 R2 features
5620 SAM Release 11.0 R2 is a maintenance release. No features have been added.
11.0 R1 features
SAM-13791 9500 MPRe integration
with 7705 SAR
The 5620 SAM supports the integration of the
9500 MPRe on the 7705 SAR-8 and 7705 SAR-18 as a
single NE, Release 6.0 R1 or later. The configuration of
radio parameters is via the MCT. Management
capabilities provide radio discovery, configuration
status and state, alarm integration and management,
and statistics management. MPT software packages are
bundled with the 7705 SAR image and the files are
pushed to the 7705 SAR during a 5620 SAM upgrade.
Shelf object
configuration chapter
in the 5620 SAM User
Guide
5620 SAM System
Administrator Guide
SAM-13793 9500 MPRe integration
with 7705 SAR
The 5620 SAM supports the integration of the
9500 MPRe on the 7705 SAR-8 and 7705 SAR-18 as a
single NE, Release 6.0 R1 or later. Radio links between
an integrated single NE are discovered and displayed on
the 5620 SAM physical map. All link-related faults are
correlated to ports and to upper-layer objects like LSPs
or services.
Shelf object
configuration chapter
in the 5620 SAM User
Guide
SAM-13857 9500 MPRe integration
with 7705 SAR
The 5620 SAM supports an integrated MCT from the NE
or port level on the 7705 SAR-8 and 7705 SAR-18 as a
single NE, Release 6.0 R1 or later.
Device object
configuration chapter
in the 5620 SAM User
Guide
Feature ID Feature or function Description See
(2 of 2)