7 — 9500 MPR/9500 MPRe port object configuration
Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-17
3HE 08459 AAAA TQZZA Edition 01
MPR User Guide
5 Expand to the port level and click on a 9500 MPR port object (DS1, ES1, or 1x radio
modem). The Physical Port (Edit) form opens with the General tab displayed.
6 Click on the Loopback tab.
7 Two interfaces are available - line facing and core facing. Select an interface.
Click on the Properties button.
8 The Loopback (Edit) form opens.
9 Configure the parameters:
• Activation
• Timeout Period (Days)
• Timeout Period (Hrs)
• Timeout Period (Mins)
10 Click on the OK button. The Loopback (Edit) form closes.
11 On the Physical Port (Edit) form, click on the OK button.
12 The Physical Port (Edit) form closes.
Note — If the card containing the ports is configured but not equipped,
a loopback test cannot be performed on the physical ports of the card.
To Next Page
Loading...
