EasyManua.ls Logo

Alcatel-Lucent AOS-W 6.5.3.x - Page 1012

Alcatel-Lucent AOS-W 6.5.3.x
1160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Location Attribute Tag=Value Format Description
AP-Name based ap-name=<name> When the location is set to ap-name, all AirGroup
users connected to this AP and other APs that are in
the same RF neighborhood can access the shared
device.
AP-Group based ap-group=<group> When the location attribute is set to ap-group, all
AirGroup users associated to the APs in the specified
AP group can access the shared device.
AP-FQLN based fqln=<fqln> When the location attribute is set to ap-FQLN, all
AirGroup users connected to APs on the same floor,
and to the APs on a floor above or below the
configured APs can access the shared device.
Table 247: Location Attributes in CPPM
In the CLI
Access the switch’s command-line interface and use the following command to enable or disable the AirGroup
Global Setting:
(host) (config) #airgroup {enable | disable}
(host) (config) #airgroup cppm-server enforce-registration
(host) (config) #airgroup ipv6
(host) (config) #airgroup query-interval <1..24>
(host) (config) #airgroup location-discovery {enable | disable}
(host) (config) #airgroup active-wireless-discovery {enable | disable}
Enabling or Disabling mDNS and DLNA
You can enable and disable mDNS and DLNA using CLI commands and WebUI.
In the CLI
Use the following command to enable or disable the mDNS or DLNA for an AirGroup service:
airgroup [mdns|dlna] enable|disable
Both mDNS and DLNA are disabled by default.
Use the following command to view the status of mDNS and DLNA features:
#show airgroup status
Viewing AirGroup Global Setting on Switch
In the WebUI
To view the global setting of AirGroup in the switch WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Select the AirGroup Settings tab to view the AirGroup Global Setting in the switch.
In the CLI
Use the following command to view the global settings of the AirGroup configuration and AirGroup services
configured in your WLAN switch.
(host) #show airgroup status
For more information, see AOS-W 6.4 Command-Line Interface Reference Guide.
AOS-W 6.5.3.x | User Guide AirGroup | 1012

Table of Contents