EasyManua.ls Logo

Alcatel-Lucent AOS-W 6.5.3.x - Page 239

Alcatel-Lucent AOS-W 6.5.3.x
1160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter Description
Jumbo
Management
Frames
(Optional) Enable or disable jumbo Ethernet frames on branch office switch ports. If you enable
this feature, you must define the Maximum Transmission Unit (MTU) for these frames. The
supported range is 1789 to 9612 bytes.
Skype4B Listen
Port
(Optional) AOS-Wprovides value-added services such as prioritization of Lync/Skype for
Business sessions, call quality metrics, and visibility by implementing Lync/Skype for Business
Application Layer Gateway (ALG). Use this parameter to define the Lync/Skype for Business
listening port. For more information, see Configuring the Lync/Skype for Business Listening Port
on page 948.
AirGroup (Optional) Enable or disable the AirGroup feature on the branch office switch. For more
information on AirGroup, see AirGroup on page 994.
AirGroup MDNS (Optional) Enable or disable support for multicast Domain Name System (mDNS) service
records. For more information, see Zero Configuration Networking on page 994.
AirGroup DLNA (Optional) Enable or disable support for DLNA (Digital Living Network Alliance); a network
standard that is derived from UPnP (Universal Plug and Play) in addition to the mDNS protocol.
For more information, see Zero Configuration Networking on page 994.
Syslog Facility Levels
Network
Security
System
User
Wireless
(Optional) Click the syslog facility levels drop-down lists to change the severity level at which the
different types of syslog messages are logged. By default, all message types are logged at the
warnings level.
Revocation CheckPoints
CA Cert (Optional) The branch switch can act as an OCSP client and issue OCSP queries to remote OCSP
responders located on the intranet or Internet. If you have uploaded an OCSP responder
certificate to the master switch, click Edit to modify the certificates used to sign OCSP for the
revocation check point. For more information on configuring a switch as an OCSP client, see
Configuring the Switch as an OCSP Client on page 299.
SNMP
AOS-W 6.5.3.x | User Guide BranchSwitch Config for Cloud Services Switches | 239

Table of Contents