Alcatel-Lucent AOS-W 6.5.3.x - Page 238

238| BranchSwitch Config for Cloud Services Switches AOS-W 6.5.3.x| User Guide
Parameter Description
General
System Contact An alphanumeric string that specifies the name of the system contact for the switch
Admin User The name of a system admin user
Admin Password The password for the system admin user
Servers
OmniVista
Server
(Optional) IPaddress of the OmniVista server, if the branch office switch is managed or
monitored by OmniVista.
Syslog Server (Optional) IPaddress of an external syslog server. You will define syslog facility levels in
subsequent configuration fields on this page.
Domain Name
Server
IP address of the domain server.
Domain name (Optional) Default domain name to be used by the branch switches. The branch switches use the
default domain name to complete hostnames that do not contain domain names.
Captive Portal
Server
Certificate
(Optional) Certificate to be used for captive-portal authentication.
Time Zone Time zone for the branch office switch. Click the DST checkbox if the selected timezone is
currently using daylight-savings time.
RADIUS
interface source
VLAN
This field identifies the interface for outgoing RADIUS packets. The IP address of the specified
interface is included in the IP header of RADIUS packets.
Advanced Settings
Master L3
Redundancy
Switchover
Timeout
If the branch switch is configured with a primary and a secondary master switch, this switchover
period defines the number of minutes that a branch switch will wait before switching its master
switch from an unreachable primary switch to the backup switch.
n Range: 15 - 60 minutes
n Default: 15 minutes
NOTE: This timeout period does not apply if a user manually switches a branch switch from a
primary to a secondary master switch by clicking the Switchover link on the Network > Switch
> System settings page of the branch switch WebUI.
firewall-visibility (Optional) Enable or disable the firewall visibility feature. For more information, see Firewall on
page 827.
AppRF (Optional) Enable or disable the AppRF feature. For more information, see AppRF on page 798.
URLFiltering (Optional) Enable Web Content Classification. For more information, seeWeb Content on page
805.
Mark
Management
Frames
(Optional) Enable or disable the marking of IPsec mangement frames. This option is disabled by
default.
Figure 43 Branch Config Group System Settings