Parameter Description
Ad-hoc AP Ageout The amount of time, in minutes, that an ad-hoc (IBSS) AP unseen
by any problems before it is deleted from the database. Enter 0
to disable ageout.
Default: 30 minutes
AP Ageout Interval The amount of time, in minutes, that an AP is unseen by any
probes before it is deleted from the database. Enter 0 to disable
ageout.
Default: 30 minutes
AM Poll Interval Interval, in milliseconds, for communication between the switch
and Alcatel-Lucent AMs. The switch contacts the AM at this
interval to download AP to STA associations, update policy
configuration changes, and download AP and STA statistics.
Default: 60000 milliseconds (1 minute)
Number of AM Poll Retries Maximum number of failed polling attempts before the polled
AM is considered to be down.
Default: 3
Station Ageout Interval The amount of time, in minutes, that a client is unseen by any
probes before it is deleted from the database. Enter 0 to disable
ageout.
Default: 30 minutes
Enable Statistics Update in DB Enables or disables statistics update in the database.
Default: enabled
Collect Stat Enables collection of statistics (up to 25,000 entries) on the
master switch for monitored APs and clients.
Default: disabled
Learn System Wired Mac Enable or disable “learning” of wired MACs at the switch.
Default: disabled
Propagate Wired Mac Enables the propagation of the gateway wired MAC information.
Default: enabled
Mark Neighbor APs as Persistent
Neighbor APs
Enables or disables APs that are marked as neighbor from being
aged out.
Default: enabled
Learn APs Enables or disables AP learning. Learning affects the way APs
are classified.
Default: disabled
Table 115: WMS Configuration Parameters
In the CLI
Use the following commands to configure WMS via the CLI. The parameters in this command are described in
detail in Table 115.
ids wms-general-profile
AOS-W 6.5.3.x | User Guide Wireless Intrusion Prevention | 498
To Next Page
Loading...