EasyManua.ls Logo

Alcatel-Lucent AOS-W 6.5.3.x - Page 620

Alcatel-Lucent AOS-W 6.5.3.x
1160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
620| Secure Enterprise Mesh AOS-W 6.5.3.x| User Guide
Parameter Description
Maximum number of
spatial streams usable for
STBC transmission.
Controls the maximum number of spatial streams usable for STBC
transmission. 0 disables STBC transmission, 1 uses STBC for MCS 0-7. Higher
MCS values are not supported. (Supported on OAW-AP170 Series, OAW-
AP130 Series and OAW-AP105 only. The configured value adjusts based on AP
capabilities.)
If you enable transmit beamforming, STBC is disabled for disabled for
beamformed frames.
MPDU Aggregation Enable or disable MAC protocol data unit (MPDU) aggregation.
High-throughput APs are able to send aggregated MAC protocol data units
(MDPUs), which allow an AP to receive a single block acknowledgment instead
of multiple ACK signals. This option, which is enabled by default, reduces
network traffic overhead by effectively eliminating the need to initiate a new
transfer for every MPDU.
Max received A-MPDU size Maximum size of a received aggregate MPDU, in bytes. Allowed values: 8191,
16383, 32767, 65535.
Max transmitted A-MPDU
size
Maximum size of a transmitted aggregate MPDU, in bytes.
Range: 1576–65535
Maximum number of
MSDUs in an A-MSDU on
best-effort AC
Maximum number of MSDUs in a TX A-MSDU on best-effort AC. TX-AMSDU
disabled if 0.
Range: 0-15
Default: 2
Maximum number of
MSDUs in an A-MSDU on
background AC
Maximum number of MSDUs in a TX A-MSDU on background. TX-AMSDU
disabled if 0.
Range: 0-15
Default: 2
Maximum number of
MSDUs in an A-MSDU on
video AC
Maximum number of MSDUs in a TX A-MSDU on video AC. TX-AMSDU
disabled if 0.
Range: 0-15
Default: 2
Maximum number of
MSDUs in an A-MSDU on
voice AC
Maximum number of MSDUs in a TX A-MSDU on voice AC. TX-AMSDU dis-
abled if 0.
Range: 0-15
Default: 0
Maximum VHT MPDUsize
Maximum size of a VHT MPDU, in bytes.
Range: 3895, 7991, 11454
Min MPDU start spacing Minimum time between the start of adjacent MPDUs within an aggregate
MPDU, in microseconds. Allowed values: 0 (No restriction on MDPU start
spacing), .25 µsec, .5 µsec, 1 µsec, 2 µsec, 4 µsec.

Table of Contents