Alcatel-Lucent AOS-W 6.5.3.x - Page 623

Deleting a Profile
You can delete a mesh high-throughput SSID profile only if no APs or AP groups are associated with that
profile.
1. Navigate to the Configuration > Advanced Services> All Profiles window.
2. Expand the Mesh menu, then select Mesh High-throughput SSID profile. A list of high-throughput SSID
profiles appears in the Profile Details window pane.
3. Click Delete by the name of the profile you want to delete.
Managing Mesh High-Throughput SSID Profiles in the CLI
You must be in config mode to create, modify or delete a mesh high-throughput SSID radio profile using the
CLI. Specify an existing high-throughput SSID profile with the <profile-name> parameter to modify an existing
profile, or enter a new name to create an entirely new profile.
Creating or Modifying a Profile
Configuration details and any default values for each of these parameters are described in Table 138. If you do
not specify a parameter for a new profile, that profile uses the default value for that parameter. Put the no
option before any parameter to remove the current value for that parameter and return it to its default
setting. Enter exit to leave the high-throughput radio profile mode.
(host)(config) #ap mesh-ht-ssid-profile <profile-name>
40MHz-enable
clone
high-throughput-enable
ldpc
legacy-stations
max-rx-a-mpdu-size
max-tx-a-mpdu-size
min-mpdu-start-spacing
mpdu-agg
no
short-guard-intvl-20mhz
short-guard-intvl-40mhz
stbc-rx-streams
stbc-tx-streams
supported-mcs-set
temporal-diversity
You can also create a new mesh high-throughput SSID profile by copying the settings of an existing profile
using the clone parameter. Using the clone command to create a new profile makes it easier to keep constant
attributes in common within multiple profiles.
ap mesh-ht-ssid-profile <profile-name> clone <source-profile-name>
Assigning a Profile to an AP Group
To associate a mesh high-throughput SSID profile with an AP group:
(host)(config) #ap-group <group> mesh-ht-ssid-profile <profile-name>
To associate a mesh radio profile with an individual AP:
(host)(config) #ap-name <name> mesh-ht-ssid-profile <profile-name>
Viewing High-throughput SSID Settings
To view a complete list of high-throughput profiles and their status:
(host)(config) #show ap mesh-ht-ssid-profile
To view the settings of a specific high-throughput profile:
AOS-W 6.5.3.x | User Guide Secure Enterprise Mesh | 623