738| Remote Access Points AOS-W 6.5.3.x| User Guide
c. USB—Select this tab to provision your RAP using 3G/EVDO USB modem.
Provisioning the RAP using a Static IP Address
Select the Static IP tab and enter the required details. See Table 159 for information on parameters.
Figure 108 Provision RAP using Static IP
Parameter Description
IP Address Enter the static IP address that you want to configure for your remote access point.
Netmask Enter the network mask.
Gateway Enter the default gateway IP address of your network.
Primary DNS Enter the IP address of your primary DNS server. This is an optional parameter.
Domain Enter your domain name. This is an optional parameter.
Table 159: Provision using Static IP
Click Save after you have entered all the details.
Provision the RAP on a PPPoE Connection
Select the PPPoE tab and enter the required details. See Table 160 for information on parameters.
Figure 109 Provision RAP on a PPPoE Connection
To Next Page
Loading...