907| 802.11u Hotspots AOS-W 6.5.3.x| User Guide
4. Select an existing profile from the list of profiles on the profile details pane or create a new profile by
entering a profile name into the entry blank, then clicking Add.
5. Configure the following parameters as desired, then click Apply.
Parameter Description
NAI Realm name
Name of the NAI realm. The realm name is often the domain name of the
service provider.
NAI Realm Encoding Issue this command if the NAI realm name is a UTF-8 formatted character
string that is not formatted in accordance with IETF RFC 4282.
NAI Realm EAP Method Select one of the options below to identify the EAP authentication method
supported by the hotspot realm.
n crypto-card: Crypto card authentication
n eap-aka: EAP for Universal Mobile Telecommunications System
(UMTS) Authentication and Key Agreement
n eap-sim: EAP for GSM Subscriber Identity Modules
n eap-tls: EAP-Transport Layer Security
n eap-ttls: EAP-Tunneled Transport Layer Security
n generic-token-card: EAP Generic Token Card (EAP-GTC)
n identity: EAP Identity type
n notification: The hotspot realm uses EAP Notification messages for
authentication.
n one-time-password: Authentication with a single-use password
n peap: Protected Extensible Authentication Protocol
n peap-mschapv2: Protected Extensible Authentication Protocol with
Microsoft Challenge Handshake Authentication Protocol version 2
Table 213: ANQPNAIRealm Profile Parameters
To Next Page
Loading...