Alcatel-Lucent AOS-W 6.5.3.x - Page 930

930| Voice and Video AOS-W 6.5.3.x| User Guide
ALG Service Name
H.323 n svc-h323-tcp
n svc-h323-udp
DHCP svc-dhcp
TFTP svc-tftp
ICMP svc-icmp
DNS svc-dns
ACL Service Name
DHCP svc-dhcp
TFTP svc-tftp
ICMP svc-icmp
DNS svc-dns
Table 223: Other Mandatory Services for the ALGs
d. For Action, select permit.
e. For Queue, select High.
f. Click Add. Repeat steps 1 to 5e to add more ALG services.
6. Click Apply.
7. Select the User Roles tab. Click Add to add a user role.
a. For Role Name, enter a name for the user role.
b. Under Firewall Policies, click Add.
c. Select the previously-configured policy name from the Choose from Configured Policies drop-down
menu.
d. Click Done.
e. Under Firewall Policies, click Add.
f. Select control from the Choose from Configured Policies drop-down menu.
g. Click Done.
8. Click Apply.
In the CLI
To configure user roles for ALGs:
(host)(config)#ip access-list session <policy-name>
(host)(config-sess-<policy-name>) #any any <service-name> permit queue high
To map the policy name to the user role:
(host)(config)#user-role <role-name>
(host)(config-role) #session-acl <policy-name>
Replace the following strings:
n policy-name with a string that you want to identify the roles policy
n role-name with the name you want to identify the voice user role