Alcatel-Lucent AOS-W 6.5.3.x - Page 929

The following ACLs are associated with the default voice role:
n SIP-ACL
n NOE-ACL
n SVP-ACL
n VOCERA-ACL
n SKINNY-ACL
n H323-ACL
n DHCP-ACL
n TFTP-ACL
n DNS-ACL
n ICMP-ACL
For more details on the default voice role, enter the following command in the config mode on your switch:
(host)(config) #show rights voice
Creating or Modifying Voice User Roles
You can create roles for NOE, SIP, SVP, Vocera, SCCP, and H.323 ALGs. Use the WebUI or CLI to configure user
roles for any of the ALGs.
In the WebUI
To configure user roles for ALGs:
1. Navigate to Configuration > Security > Access Control.
2. Select the Policies tab. Click Add to create a new policy.
3. For Policy Name, enter a name here.
4. For Policy Type, select Session.
5. Under Rules, click Add.
a. For IP Version, select IPv4.
a. For Source, select any.
b. For Destination, select any.
c. For Service, select service, then the correct voice or video ALG service. See Table 222 and Table 223 for
service names for all ALGs:
ALG Service Name
NOE n svc-noe
n sip-noe-oxo
SIP n svc-sips
n svc-sip-tcp
n svc-sip-udp
SVP svc-svp
VOCERA svc-vocera
SCCP svc-sccp
Table 222: Services for ALGs
AOS-W 6.5.3.x | User Guide Voice and Video | 929