Parameter Value
--------- -----
Stats Enabled
Tag Enabled
Sessions Enabled
Monitored Info Disabled
Misc Enabled
Location Enabled
UCC Monitoring Enabled
AirGroup Info Disabled
Inline DHCP stats Enabled
Inline AP stats Enabled
Inline Auth stats Enabled
Inline DNS stats Enabled
Execute the following command in the switch CLI to view the current switch configuration with respect to the
management server configuration profile:
(host) #show running-config | include mgmt-server
Building Configuration...
mgmt-server type amp primary-server 192.0.2.1 profile default-amp
mgmt-server profile "default-amp"
The UCC-OmniVista integration is complete.
UCC Call Quality Metrics
Computing the call quality metrics is an important aspect of troubleshooting. The metrics enable
administrators to get an idea of the quality of service on the network and troubleshoot network congestion
whenever required. AOS-W 6.3.x provides UCC call quality metrics for Lync/Skype for Business voice calls only
at the end of the call. In addition to capturing call quality metrics at the end of the call, AOS-W 6.4.x captures
call quality metrics for active calls. The call quality metrics are extended to voice, video, desktop-sharing, and
file-transfer applications.
A new metric, UCC score is introduced in AOS-W 6.4. UCC score computes the quality of voice calls. It takes
delay, jitter, and packet loss of RTP packets into account. UCC score is computed on a scale of 0 to 100. This
feature works in tunnel, decrypt-tunnel, and split-tunnel forward modes. To compute the UCC score, you must
enable RTP Analysis on the master switch. Issue the following CLI commands:
(host) (config) #voice real-time-config
(host) (Configure Real-Time Analysis) #config-enable
Table 233 shows the call quality parameters displayed on the switch for various UCC ALGs.
AOS-W 6.5.3.x | User Guide Voice and Video | 961
To Next Page
Loading...