Aug 14 06:49:08 00:1a:1e:a8:2d:80 27 20466 6154 20460 2522 2310190
0 26245 0
Enabling Voice Logs
AOS-W allows you to debug voice logs. Additionally, it allows you to debug the voice logs for a specific voice
client based on the client's MAC address.
You can use the WebUI or CLI to set the voice logging level to debugging.
In the WebUI
1. Navigate to the Configuration > Management > Logging page.
2. Click Levels.
3. Select the voice check box under the User Logs category.
4. Select Debugging from the Log Level drop down menu and click the Done button.
Figure 218 Enable Voice Logging
5. Click Apply.
Enabling Logging for a Specific Client
1. Navigate to the Configuration > Advanced Services > All Profiles page.
2. Expand Other Profiles under the Profiles section and click VoIP Logging.
3. Enter the MAC address of the voice client in the Client's MAC address for logging field.
Figure 219 Enable Logging for a Voice Client
4. Click Apply .
To enable logging on a specific voice client, you must enable voice logs.
In the CLI
To set the voice logging level to debugging:
(host) #configure terminal
(config) #logging level debugging user subcat voice
To debug voice logs for a specific client:
(config) #voice logging
AOS-W 6.5.3.x | User Guide Voice and Video | 991
To Next Page
Loading...