992| Voice and Video AOS-W 6.5.3.x| User Guide
(VoIP Logging) #client-mac 11:22:33:44:55:67
To view the client's MAC address for logging:
(host) #show voice logging
VoIP Logging
------------
Parameter Value
--------- -----
Client's MAC Address for Logging 11:22:33:44:55:67
Viewing Voice Traces
AOS-W enables you to view the voice signaling message traces. You can view up to 8000 entries of trace
messages. The trace message displays the ALG, client name, client's IP, event time, and the message direction.
Additionally, it displays the BSSID information to help troubleshooting roaming issues.
You can use the WebUI or CLI to view the trace messages.
In the WebUI
1. Navigate to the Monitoring > Voice > Voice Clients page and select the voice client.
2. Click Troubleshooting to view the voice traces.
In the CLI
To view the voice signaling message traces:
(host)#show voice trace sip count 5
SIP Voice Client(s) Message Trace
---------------------------------
ALG Client Name Client(MAC) Client(IP) Event Time Direction Msg
BSSID
--- ----------- ----------- ---------- ---------- --------- ---
-----
SIP 6202 00:03:2a:02:75:cc 10.15.20.123 Aug 14 13:14:32 Server-To-Client 200_OK
00:0b:86:b7:83:91
SIP 6202 00:03:2a:02:75:cc 10.15.20.123 Aug 14 13:14:32 Client-To-Server REGISTER
00:0b:86:b7:83:91
SIP 6202 00:03:2a:02:75:cc 10.15.20.123 Aug 14 13:14:31 Server-To-Client 200_OK
00:0b:86:b7:83:91
SIP 6202 00:03:2a:02:75:cc 10.15.20.123 Aug 14 13:14:31 Client-To-Server REGISTER
00:0b:86:b7:83:91
SIP 6202 00:03:2a:02:75:cc 10.15.20.123 Aug 14 13:14:29 Server-To-Client 4XX_
REQUEST_FAILURE 00:0b:86:b7:83:91
Num of Rows:5
Viewing Voice Configurations
AOS-W allows you to view the details of the voice related configurations on your switch such as firewall policies,
AP group profiles, SSID profiles, virtual AP group profiles, VoIP Call Admission Control profiles, 802.11k profiles,
and SIP settings. Additionally, you can view the status of RTCP analysis, and SIP mid-call request timeout.
This release of AOS-W does not support viewing the voice configuration details using the WebUI.
In the CLI
To view the voice configuration details on your switch:
(host) #show voice configurations
To Next Page
Loading...