OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 29 TC1449
7.5 Network & VoIP compatibility
7.5.1 ABC-F2 trunk group compatibility summary
Release 10.0 Observation
< Release 5.0 Ux
Release 5.0 Ux
Release 5.0 Lx
ABC trunk group only No progressive migration to a network
UTF-8 compatibility: set the New Local Name
UTF-8 for users system parameter to False
Releases
5.1.x
6.x
7.x
8.0
8.0.1
(1)
No Total compatibility
but progressive migration
authorized (1)
See table in
7.4.2
Audit/Broadcast: E2.404.b - E2.502.2.e -
E2.504.1.e
UTF-8 compatibility: Set the Enable UTF8 in
ABCF network system parameter to False if a
node is in a non-compatible UTF-8 version
Set the Direct RTP and H323 Internode
Protocol system parameters to True in all nodes
Releases
9.0
9.1
Total
ABC-F compatibility
(2)
See table in 7.4.2
Refer to the technical communication TC1090
Wrong IP Touch Ethernet port speed negotiation if
using Gigabit sets
Set the Direct RTP and H323 Internode
Protocol system parameters to True in all nodes
(1) This Release is no more supported. Only the progressive migration is allowed.
(2) See Appendix 2.
7.5.2 Number of compressors/algorithms that can be used with INTIPx and GDx/GAx
The term INTIP (resp. GD, GA) concerns INTIP boards as well as INTIP2 (resp. GD2, GA2).
REMINDER
LIO P/B/X COMP6 and LIOE boards are prohibited as soon as there is a node in R7.1 in the
network. Moreover, the LIO P/B/X -COMP6 boards are not authorized in a network with
INTIP or GA/GD.
To Next Page
Loading...
Need help?
General
