OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 30 Ed. 02 / 22 June 2011
G711
With or w/out VAD
G723.1
With or w/out VAD
G729
With or w/out VAD
GIP6A 14 14 14 32 ms echo
cancellation
GIP6 56 56 56
GIP4-1 16 16 16
INTIP with
2 daughter
boards
(1 & 2)
128 ms echo
cancellation
GIP4-4 60 60 60
MCV8 8 7 7 32 ms echo
cancellation
MCV24 24 21 21
MADA-1 8 8 8
GD or GA
128 ms echo
cancellation
MADA-3 24 24 24
GD3 or
GA3 with 1
daughter
board
128 ms echo
cancellation
Armada 60 60 60
INTIP3 with
3 daughter
boards (3)
128 ms echo
cancellation
Armada
120 120 120
(1) It is not authorized to have two daughter boards of different types on a same INTIP board.
(2) The echo delay is not configurable, it depends on the hardware used.
(3) Only the INTIP3A can have up to 3 daughter boards (1 daughter board maximum for INTIP3B).
In case embedded encryption is managed on INTIP3A, only 1 daughter board maximum can be
used (i.e. maximum 60 compressors instead of 120).
7.6 Alcatel-Lucent 4635 voice mail compatibility
CAUTION
Check the compatibility of backplanes; refer to the technical communication TC0155 Compatibility
of Alcatel 4635 with OmniPCX 4400 backplanes (Reminder of restrictions).
Below is a reminder of the compatibility between Alcatel-Lucent 4635 and OmniPCX Enterprise
R10.0 software.
OmniPCX Enterprise
Release
Ø
VPCPU
SCSI Disk
VPCPU-1
IDE Disk
VPS35
16 MB RAM
VPS35 (Note)
32 MB RAM
VPM35 (Note)
32 MB RAM
10.0 Incompatible Incompatible Incompatible Incompatible Incompatible
VPM35
64 MB RAM
VPU5
16 ports
VPU6 (ROHS)
16 ports
OmniPCX Enterprise
Release
Ø
Mini Maxi Mini Maxi Mini Maxi
10.0 5.2.6 5.4.9 5.2.6 5.4.9 5.3.1 5.4.9
Notes
− VPS35 board is replaced by the VPU6 board for any migration towards OmniPCX Enterprise
R10.0.
− IMAP (A4635 version 5.2.6 or higher) and VPIM (A4635 version 5.1.4) require 64 MB of RAM.
To Next Page
Loading...
Need help?
General
