OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
Ed. 02 / 22 June 2011 45 TC1449
9.4.1 Rebuilding the database before saving
login
mtcl
directory
/DHS3data/mao
command
/DHS3bin/fab/fichges recover all (if R ≤ 1.5.2)
fichges force_recover_dico (if R > 1.5.2)
This operation may be long and it is essential not to interrupt it while running.
9.4.2 Saving the rebuilt database
Carry out the back-up in swinst and transfer it to disk or PC.
CAUTION
− Do not choose the save option "Save for rebuilt".
− Do not use a base saved in "Automatic save".
REMARKS: On the saving of charging tickets.
Sites going from A9.5xx to R10.0 which wish to retain client tickets (hotel or hospital type) in the
‘TABJUSTIF’ files should "empty" the administrative tickets before saving as these are no more
processed as of R3.0. As of R3.0, administrative tickets are stored in compressed files.
Sites going from R1.5.2 to R10.0which already have compressed files should save them as they will
be compatible.
CAUTION
− The shelves already created in position 18 and 19 must be moved before the translation. If this is
not done, they will not start. In fact, when migrating from OmniPCX 4400 to OmniPCX Enterprise
R10.0 with change of CPU 4400 by an Appliance Server, there is an automatic translation of
shelves created in these 2 positions. This automatic translation does not exist if the CPU of type
4400 is retained.
− There is no automatic translation from Releases below 1.5.3 to Release 10.0. For all these
versions, it is essential to go via an intermediate translation in a release compatible with
translation to R10.0 (from R1.5.3 to R5.1.2).
− There is no automatic translation from the Custom Release 3.0C (C1.580.1) to Release 10.0. It
is essential to carry out an intermediate translation with Custom Release 3.2-C2 (C1.762.18
minimum).
9.5 Saving Chorus/Linux data
REMINDER
If there are no disk drives, the back-up version of the OmniVista 4760 tool must be used; see the
OmniVista 4760 technical documentation.
There is no automatic translation of Chorus data of Releases below R3.0. You
should not restore the Chorus data of Releases below R3.0 but perform manually a
complete netadmin.
To Next Page
Loading...
Need help?
General
