OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 40 Ed. 02 / 22 June 2011
T38 Fax over SIP operation is supported with the MP-112 equipment. The transfer in TCP mode is
not allowed, the UDP one must be used.
From Release 9.0 on, an analog set behind a MP-118 must be set as "SIP Extension". A fax behind a
MP-118 will remain in "SIP Device" (formerly "External Set").
7.10.4 SIP Survivability
The version of SIP proxy servers tested with this feature is the following:
• AudioCodes MP-118 : 5.20A.026.007
• Cisco 2801 SRST : c2801-ipvoicek9-mz.124-11.XW.bin
• Teldat Atlas 150 : 10.6.47
7.10.5 LLDP-MED on IP Touch sets
The data switches, and their relative version, which have been qualified for this feature are the
following:
• Cisco Catalyst 3750 : 2.12(46)SE
• HP ProCurve 2610 : R.11.25
Refer to Technical Communication TC1290 LLDP-MED on IP Touch sets for more information
(settings, restrictions, …).
8. CLIENT INFORMATION
The purpose of this section is to specify the changes in ergonomics or operation that will be visible to
users after changing versions.
In Release 10.0, a new ergonomics appears for the 4059 application.
− Localization: Japanese on 4059 (Windows 7)
8.1.1 Reminder of changes appeared in Release 9.1
A new ergonomics appears for some features of 40x8 sets and MIPT.
− Localization: Hebrew (only for 4028/4038/4068 sets).
− Localization: Arabic (only for 4028/4038/4068 sets), from patch I1.605.14.e.
− PERSO page displaying after a time-out.
− MIPT alarm display.
8.2 Reminder of changes appeared in Release 9.0
− External called number display after call answer (managed by a system boolean).
− Localization: Valenciano language.
− Local time display on sets located in a time zone different of CS as well as in mini-messages, the
list of non-answered calls, Wake-up/Appointment requests.
It concerns voice messages time/date stamp only for OT8440 (not 4635 and 4645).
To Next Page
Loading...
Need help?
General
