OmniPCX Enterprise
INSTALLATION PROCEDURE FOR VERSION
J1.410.34.c – RELEASE 10.0
TC1449 32 Ed. 02 / 22 June 2011
For more details on the CPU6 Step2, refer to the technical communication TC0230 CPU6 Step2
board – 3BA 23197 AA.
CPU7-2 boards are only compatible from Release 7.1.
7.7.2 Common Hardware CPU boards
As of Release 8.0, CPU-CS boards must be equipped with 256 MB RAM:
References: Single SDRAM 256 MB: 3EH 75056 AA
CPU-CS board equipped with 256 MB RAM: 3EH 73048 BB
CS-2 CPU boards are supported as of Release 9.0 (from patch H1.301.31.b). To install a software
on a CS-2 board, PC Installer must be in version 2.24 minimum ; refer to the technical
communication TC1212 CS-2 board introduction.
7.7.3 Appliance Server
Only Alcatel-Lucent recommended Appliance Servers are to be used.
Status Phase to "Out": no more in OmniPCX Enterprise catalog
O = Supported by the Release and in catalog
S = Supported by the Release but no more in catalog
N = Non supported by the Release
* = Only on addition
Appliance Server
OmniPCX Enterprise Model Phase
Status
R6.2/R7.0 R7.1 R8.0.x R9.0 R9.1/R10.0
IBM 305 Out S S S (2) S (2) S (2)
IBM X306 Out S S S (2) S (2) S (2)
IBM X306M Out O (1) O O (2) S (2) S (2)
IBM X3250 Out N O O (2) O (2) O (2)
IBM X3250-M2 N O (5) O (4) O O
IBM X3250-M3 N N O O (6) O (7)
HP DL320 G5 N N O (2) O (2) O (2)
HP DL320 G5p N N O (3) O O
HP DL320 G6 N N N O (6) O (7)
(1) Minimum version = F3.301.16.d
(2) Memory size = 1 GB
(3) Minimum version = G1.503.11
(4) Minimum version = G1.503.16.a
(5) Minimum version = F5.401.36.d
(6) Minimum version = H1.301.42.a
(7) Minimum version = I1.605.16.c
To Next Page
Loading...
