Configuring an ERP Ring Configuring ERP
page 9-16 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Clearing ERP Statistics
To clear ERP statistics for all rings in the switch, use the clear erp statistics command. For example:
-> clear erp statistics
To clear ERP statistics for a specific ring in the switch, use the clear erp statistics command with the ring
parameter to specify a ring ID. For example:
-> clear erp statistics ring 5
To clear ERP statistics for a specific ring port, use the clear erp statistics command with the ring and
port parameters. For example:
-> clear erp statistics ring 5 port 1/2
To clear ERP statistics for a specific link aggregate ring port, use clear erp statistics command with the
ring and linkagg parameters. For example:
-> clear erp statistics ring 5 linkagg 2
Use the show erp statistics command to verify ERP statistics. For more information about this command,
see the OmniSwitch CLI Reference Guide.
To Next Page
Loading...
