Diagnosing Switch Problems sFlow Overview
OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 26-7
sFlow Overview
The following sections detail the specifications, defaults, and quick set up steps for the sFlow feature.
Detailed procedures are found in “sFlow” on page 26-29.
sFlow Specifications
sFlow Defaults
The following table shows sFlow default values:
sFlow Defaults
RFCs Supported 3176 - sFlow
Management Information Base
Platforms Supported OS10K
Sampling Sampling rate of one (1) counts all packets and 0
(zero) disables sampling.
Agent IP Address Configurable using sflow agent ip command.
Parameter Description CLI Command Default Value/Comments
Receiver Name sflow agent Empty
Timeout Value sflow agent 0 seconds
IP Address sflow agent 32 bit address (IPv4)
Data File Size sflow agent 1400 Bytes
Version Number sflow agent 5
Destination Port sflow agent 6343
Receiver Index sflow sampler 0
Packet Sampling Rate sflow sampler 0
Sampled Packet Size sflow sampler 128 Bytes
Receiver Index sflow poller 0
Interval Value sflow poller 0 seconds
To Next Page
Loading...
