Switch Logging Specifications Using Switch Logging
page 28-2 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Switch Logging Specifications
Platforms Supported OmniSwitch 10K
Functionality Supported High-level event logging mechanism that forwards
requests from applications to enabled logging
devices.
Functionality Not Supported Not intended for debugging individual hardware
applications.
Number of Syslog Servers Supported 1
Logging Devices Flash Memory/Console/IP Address
Application ID Levels Supported IDLE (255), DIAG (0), IPC-DIAG (1), QDRIVER
(2), QDISPATCHER (3), IPC-LINK (4), NI-
SUPERVISION (5), INTERFACE (6), 802.1Q (7),
VLAN (8), GM (9), BRIDGE (10), STP (11),
LINKAGG (12), QOS (13), RSVP (14), IP (15),
IPMS (17), AMAP (18), GMAP (19), SLB(25),
AAA (20), IPC-MON (21), IP-HELPER (22),
PMM (23), MODULE (24), EIPC (26), CHASSIS
(64), PORT-MGR (65), CONFIG (66), CLI (67),
SNMP (68), WEB (69), MIPGW (70), SESSION
(71), TRAP (72), POLICY (73), DRC (74), SYS-
TEM (75), HEALTH (76), NAN-DRIVER (78),
RMON (79), TELENET (80), PSM (81), FTP (82),
SNMI (83), DISTRIB (84), EPIL0GUE (85),
LDAP (86), NOSNMP (87), SSL (88), DBGGW
(89), LANPOWER (108)
Severity Levels/Types Supported 2 (Alarm - highest severity), 3 (Error),
4 (Alert), 5 (Warning) 6 (Info - default),
7 (Debug 1), 8 (Debug 2), 9 (Debug 3 - lowest
severity)
To Next Page
Loading...
